IVE3015UBPKG/US
電感式傳感器
矩形塑料
接插件
抗電磁干擾的

感應距離 15 mm [f]
齊平安裝

電氣設計   DC PNP
輸出功能   常開
  
工作電壓 [V]  10...60 DC
電流負載 [mA]  200
  
短路保護   脈沖
反相保護   是
過載保護   是
電壓降 [V]  < 3
  
電流損耗 [mA]  < 20 (24 V)
  
實際感應距離 (Sr) [mm]  15 ± 10 %
工作距離 [mm]  0...12.1
開關點偏移 [Sr的百分比]  -10...10
遲滯 [Sr的百分比]  3...15
開關頻率 [Hz]  50
修正系數   鋼(St37) = 1 / 不銹鋼約0.85 / 黃銅約0.4 / Al約0.4 / Cu約0.3
  
環境溫度 [°C]  -25...70
防護等級   IP 67, II
EMC電磁兼容   EN 60947-5-2  
EN 55011:  等級B 
 
外殼材料   改良的PPE
功能顯示   
開關狀態 LED  黃色
  
接口   M12接插件
  
重量 [kg]  0.259
注釋   有效區的5個位置可選

德國IFM電感式傳感器，IV5025

 Function and features
This sensor detects metals without contact and indicates their presence by
providing a switched signal. Nominal sensing range (Sn): see type lable; Operating
distance 0...[Sn x 0.81] mm (values based on standard measurement with mild
steel; a shorter sensing range for other metals).
Installation
Screw the sensor to a firm base.
If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (fig. 1 and 2).
Open space around the sensing face
when mounted in metal: fig. 3.
Minimum distance when several
sensors of the same type are
mounted: fig. 4 and 5.

Electrical connection
Disconnect power before connecting the sensor. Open the sensor (fig. 6);
connect the cable in accordance with the instructions on the type lable.
Use cable gland to maintain protection IP67; cable gland not supplied.
6
LEDs
7
Alignment of the sensing face
Remove the sensor cube (fig. 7); align the sensing face and re-insert the sensor
cube.
Operation
Check the safe functioning of the sensor.
The green LED is lit when the supply voltage is applied.
The yellow LED is lit when the output is switched.
The operation of the sensor is maintenance-free. For perfect functioning make
sure that:
the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwards;
EMC: The unit conforms to the requirements of EN 60947-5-2.

德國IFM電感式傳感器，IV5025

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!