TURCK電感式傳感器，NI35-CP40-Y1X/S100
電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn
ATEX 防爆認證II 組設備，設備等級2G. 可
用于氣體危險1區
ATEX防爆認證 II 組設備，工作溫度70°C
時，可用于粉塵危險0區
符合SIL2和IEC 61508標準
方型外殼，厚度40 mm
感應面可調9個方向
塑料, PBT-GF30-V0
耐高溫到100℃
2線直流, nom. 8.2 VDC
輸出遵循本安型DIE60947-5-6
(NAMUR)標準
接線端子
額定工作距離Sn 35 mm
安裝方式非齊平
實際測量范圍ð (0,81 x Sn) mm
修正系數St37 = 1, V2A = 0.7, Ms = 0.4, Cu = 0.3, Al = 0
重復精度ð 2 %
溫度漂移ð ± 10 %
ð ± 20 %, ï +70 ℃
磁滯1…10
環境溫度-25…+100
針對防爆區域應用參考使用說明
輸出性能2線, NAMUR
開關頻率e 0.08 kHz
電壓Nom. 8.2 VDC
無激勵電流損耗. 2.1 mA
激勵電流損耗e 1.2 mA
認證依據KEMA 02 ATEX 1090X
內置 電感(Li) / 電容 (Ci) 250 nF / 350 μH
防爆標志é II 2 G Ex ia IIC T6/II 1 D Ex ia D 20 T95 °C
( Ui = 20 V, Ii = 60 mA, Pi = 200 mW)
警告防靜電
設計方型, CP40
尺寸114 x 40 x 40
外殼材料塑料, PBT-GF30-V0, 黑
連接接線端子
夾緊能力e 2.5 mm2
防震動性55 Hz (1 mm)
防沖擊性30 g (11 ms)
防護等級IP67
開關狀態指示LED指示燈 黃
功能原理
電感式傳感器以無磨損和非接觸的方式來檢測
金屬物體 基于此目的它通過高頻交流電磁場來
檢測被測物 對電感式傳感器而言，磁場由繞在
鐵氧體芯線圈上的LC振蕩電路產生。
特殊型電感式傳感器能被用于-60℃到
+250℃。
TURCK電感式傳感器，NI35-CP40-Y1X/S100
ATEX approval Group II equipment, equipment level 2G.
For gas hazardous Zone 1
ATEX Certified Group II equipment, operating temperature 70 ° C
Can be used for dust hazardous zone 0
Comply with SIL2 and IEC 61508
Square shell thickness of 40 mm
Sensing surface adjustable nine direction
Plastics, PBT-GF30-V0
High temperature to 100 ° C.
2-wire DC, nom. 8.2 VDC,
Output to follow Intrinsically Safe DIE60947-5-6
(NAMUR) standard
Terminals
Rated operating distance Sn a 35 mm
Installation non-flush
The actual measurement range ð (0,81 x Sn) mm
Correction coefficient St37 = 1, V2A = 0.7, Ms = 0.4 and Cu = 0.3, Al = 0
Repeatability ð 2%
Temperature drift ð ± 10%
ð ± 20%, ï +70 ° C
Hysteresis 1 ... 10
Ambient temperature -25 ... +100
Application Reference instructions for hazardous areas
Output performance, 2-wire, NAMUR
Switching frequency of e 0.08 kHz,
Voltage Nom. 8.2 VDC
Loss of excitation current 2.1 mA,
Excitation current loss e 1.2 mA
Certification in accordance with KEMA 02 ATEX 1090X
Built-in inductance (Li) / capacitor (Ci) of 250 nF / 350 μH
Explosion-proof mark é II 2 G Ex ia D Ex ia D 20 the T95 ° C, the IIC T6/II
(Maximum Ui = 20 V, Ii = 60 mA, Pi = 200 mW)
Warning anti-static electricity
Square design, CP40
Dimensions 114 x 40 x 40
Plastic shell material, PBT-GF30-V0, black
The connection terminals
2.5 mm2 clamping capacity e
Anti-vibration 55 Hz (1 mm)
30 g of anti-shock (11 ms)
Degree of protection IP67
Switch status indication LED indicator yellow
Function Principle
Inductive sensors to detect a wear-free and non-contact manner
Metal objects For this purpose, it came through the high-frequency alternating current field
Detection measured on inductive sensors, the magnetic field around the
LC oscillator circuit to generate on the ferrite core coil.
Special type of inductive sensors can be used to -60 ° C to
+250 ℃.
TURCK電感式傳感器，NI35-CP40-Y1X/S100
