費斯托空隙傳感器，SOPA-CM1H-R1-WQ6-2P-M12

電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn

特性  特性
  標準產品
 
授權   
CE 符號 (參見符合的標準)   
材料備注  
符合 RoHS
測量原則   
傳感器范圍   
工作壓力   
工作介質   
關于工作和先導介質的說明   
環境溫度   
Repetition accuracy of switching point  
±5 µm sensing range 20 to 200µm
輸出電流   
短路強度   
工作電壓范圍 DC   
極性容錯保護   
電連接  
M12x1
插頭
符合EN 60947-5-2標準
圓形設計
安裝類型  
帶通孔
帶高帽式導軌
墻面/表面固定
氣動連接   
產品重量   
外殼的材料信息   
顯示類型   
設定選項  
通過顯示裝置和按鈕
防止誤操作   
防護等級  
to IEC 60529

費斯托空隙傳感器，SOPA-CM1H-R1-WQ6-2P-M12

 The following notes must be observed
when lubricated compressed air is used:
• Use Festo special oil OFSW-32 or the
alternatives listed in the Festo
catalogue (as specified in
DIN 51524-HLP 32; basic oil viscosity
32 cSt at 40 °C).
• If lubricated compressed air is used,
additional lubrication must not exceed
25 mg/m3 (ISO 8573-1:2010). The
quality of compressed air downstream
of the compressor must correspond to
that of unlubricated compressed air.
• The lifetime lubrication required for
unlubricated operation can be
"flushed out" when products are operated
using lubricated compressed air.
This can result in malfunctions if a system
is switched back to unlubricated
operation after lubricated operation.
• The lubricators should, where possible,
always be installed directly
upstream of the cylinders used in order
to prevent operating the entire system
with lubricated air.
• Never over-lubricate the system. To determine
the correct lubricator settings,
the following "oil form test" can be implemented:
hold a piece of white card
approx. 10 cm away from the exhaust
port (without silencer) of a working
valve of the most distant cylinder. Allow
the system to work for some time,
the card should only showa pale yellow
colouration. If oil droplets appear,
this is an indication that too much oil
has been used.
• The colour and condition of the exhaust
silencer provide further evidence
of over-lubrication. Marked yellow
colouration and dripping oil indicate
that the lubrication setting is too high.
• Dirty or incorrectly lubricated
compressed air will reduce the service
life of the pneumatic components.
• Service units must be inspected at
least twice a week for condensate and
correct lubrication settings. These
inspections should be included in the
machine maintenance plan.
• To protect the environment, as little
lubrication as possible should be
used. Festo pneumatic valves and
cylinders have been constructed in
such a manner that, under permitted
operating conditions, additional
lubrication is not required and yet

A differentiation must be made between
residual oil for operation with unlubricated
air and additional oil for operation
with lubricated air.
Unlubricated operation:
Examinations involving residual oil content
have revealed that the various types
of oil have entirely different effects. For
this reason, a distinction must be made
between the following oil types when
analysing the residual oil content:
• Bio-oils: oils based on synthetic or
natural ester (e.g. rapeseed oil methyl
ester). In this case, residual oil content
must not exceed 0.1 mg/m3.

費斯托空隙傳感器，SOPA-CM1H-R1-WQ6-2P-M12

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!