德國FESTO連接電纜，NEBU-M12G5-K-2，5-LE4

電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
QQ：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn

特性  特性
  標準產品
 
電纜屬性  標準
適合于拖鏈
用于機器人
Basic
工作狀態顯示  黃色 LED
用于 NPN - 常開
用于PNP - 常開
LED, 藍色
適用于 PNP N/C 觸點
工作電壓范圍 AC  0 ... 250 V 
工作電壓范圍 DC  0 ... 250 V 
污染等級  3 
CE 符號 (參見符合的標準)  根據 EU low 電壓 指導原則 
防護等級  IP65
IP68
電連接  2芯
2針
3芯
3針
4芯
4針
5-adrig
5針
Rotatable socket
直列式插頭插座
直角式插頭插座
M12x1
M8x1
直列式插頭
直角式插頭
可旋轉螺紋
開放式末端
電纜長度  0.1 ... 30 m 
鎖緊螺母的材料信息  黃銅
鍍鎳
材料備注  無鹵素電纜
耐油電纜
不含有黃銅和PTFE
符合 RoHS
外殼的材料信息  TPE-U(PU) 
電纜護套的材料信息  PVC
TPE-U(PU)

德國FESTO連接電纜，NEBU-M12G5-K-2，5-LE4

 Under normal operating conditions,
pneumatic valves from Festo can be
operated with lubricated or unlubricated
compressed air.
If any particular product requires a
different quality of compressed air, this is
indicated in the technical data for the
relevant product.
Operation with unlubricated compressed
air is made possible by the selection of
the material combinations, the shape of
the dynamic seals and the basic
lubrication applied ex works.
Operation with unlubricated compressed
air is not possible under the following
operating conditions:
• Once the valves have been operated
with lubricated compressed air, it is
essential that lubricated compressed
air is always used subsequently since
the oil in the lubricated air will have
flushed away the basic lubrication.
• In all cases, a grade of filtration is
required that removes contaminants
up to 40 μm (standard filter cartridge
version).
Micro compressed air filtration may be
required for special applications.

Standard nominal flow rate qnN is the
flow rate characteristic used by Festo for
a device or component expressed in
l/min.
The standard nominal flow rate qnN is
the flow rate based on standard conditions
(to DIN 1343) under the following
measurement conditions:
?Test medium air
?Temperature 20 ? 癈 (temperature of
medium)
?Test specimen at ambient temperature
?The pressures to be set are for components
with constant cross section
(e.g. directional control valves):
Supply pressure p1 = 6 bar
Output pressure p2 = 5 bar
Standard conditions to DIN 1343:
?tn = 0 癈 (standard temperature)
?pn = 1.013 bar (standard pressure)
Exception 1:
Silencer
Supply pressure p1 = 6 bar
Output pressure p2 = pamb
pamb = atmospheric pressure
Exception 2:
Low-pressure components
Supply pressure p1 = 0.1 bar
Output pressure p2 = pamb
Exception 3:
For pressure regulators:
Supply pressure p1 = 10 bar (constant)
and output pressure p2 = 6 bar
at q = 0 l/min are set for the test specimen.
Subsequently, the flow rate is
slowly and constantly increased using
the flow control valve until the output
pressure reaches a value of p2 = 5 bar.

The nominal size provides information
about the smallest cross section in the
main flow of the valve. It specifies the
diameter of the orifice and is expressed
in mm. This is a measurement that only
provides a limited comparison between
different components. To compare
products, the standard nominal

Standard nominal flow rate qnN is the
flow rate characteristic used by Festo for
a device or component expressed in
l/min.
The standard nominal flow rate qnN is
the flow rate based on standard conditions
(to DIN 1343) under the following
measurement conditions:
• Test medium air
• Temperature 20 ±3 °C (temperature of
medium)

德國FESTO連接電纜，NEBU-M12G5-K-2，5-LE4

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!