ASCO低功率電磁閥,世格電磁閥技術文章
- the weight of the load,
Cushioning capacity
Graph II is used to determine the type of cushioning needed.
If the intersection point of the final velocity and the load falls
below the curves, the internal cushions are adequate. If this
圖II用于確定所需的緩沖類型。
如果終速度和載荷的交點落下在曲線下方，內部靠墊足夠。
OTHER ACCESSORIES:
? Tube support brackets: You must determine if intermediate
tube support brackets are required, depending on the weight of
the charge and the stroke. (see chart on tube support sheet).
? Reed switch or magneto-inductive detectors for position
control
- the position of the load (centered on the carrier or elsewhere),
- the final or average velocity.

如果這不是這樣，你必須選擇一個更大的圓柱體更大的緩沖能力，
或使用減震器可作為附件使用。
如果你確定了內部墊子將在其容量附近使用而且運動非常激烈，使用是明智的可選減震器。
其他附件：
is not the case, you must either choose a larger cylinder with
greater cushion capacity, or use the shock absorbers which
are available as an accessory. If you have determined that the
internal cushions would be used near their maximum capacity
and there is highly intense movement, it would be wise to use
the optional shock absorbers.

ASCO低功率電磁閥,世格電磁閥技術文章

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!