YUKEN液壓換向閥，DSG-01-3C4-D24-N1-50

概述：
The change of the pilot from external to internal
06" can provide 500 L/min (132 U.S.GPM)
and high flow, the valves can make
the size or configuration of the equipment compact.
and "10" can provide 1100 L/min (291 U.S.GPM)
in the maximum flow respectively and
they can also withstand s uch a high pressure
on or removing the relevant plug on the valve.
as 31.5 Mpa {4570 PSI} as the maximum operating pressure.
With these features of high pressure
and the change of the drain f rom internal to external
or viceversa can be done easily by putting
特點：
electrical plug connectors-Characteristics and requirements).
There being no spark between contacts,
the life of the relay becomes longer.  Time lag for spool
Since surge voltage can be controlled to a very low figure,
electric control devices, such as a computer,
return after de-energisation of the solenoid is very short.
can be used without any interference like noise.
standard ISO 4400 (Fluid power systems and componentsThree-pin
The solenoid connectors are conform to the international
型號一覽：
DSG-01-3C9-D24-N1-50
DSG-03-3C11-D24-N1-50
DSG-01-2B3-D24-N1-50
DSG-01-3C40-D24-N1-50
 DSG-03-2B2-D24-N1-50-L
DSG-01-2D2-A220-N1-50
DSG-01-2B2B-D24-N1-50
DSG-03-3C12-D24-T-N1-50
DSG-01-3C2-R220-50
DSG-01-2B0-D24-N1-50

YUKEN液壓換向閥，DSG-01-3C4-D24-N1-50

產品留言

標題

聯系人

聯系電話

內容

驗證碼

點擊換一張

注：1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!